Select Page

Easy DIY Projects: Customizing Your Own Pillow Covers

Personalizing your pillow covers can add a unique touch to your home decor. Whether you’re a seasoned crafter or a DIY novice, these step-by-step instructions will guide you through three creative techniques: painting, embroidery, and applying fabric embellishments.


1. Painted Pillow Covers

Materials:

  • Plain pillow cover (cotton or linen works best)
  • Fabric paint
  • Stencils (optional)
  • Paintbrushes or sponge brushes
  • Painter’s tape (optional)
  • Cardboard or a plastic sheet

Instructions:

  1. Prepare Your Workspace:
    • Lay down a protective covering to avoid getting paint on your surfaces.
    • Place a piece of cardboard or plastic sheet inside the pillow cover to prevent the paint from bleeding through to the other side.
  2. Plan Your Design:
    • Decide on your design. You can freehand paint, use stencils, or create geometric patterns with painter’s tape.
  3. Apply the Paint:
    • If using stencils, tape them securely onto the pillow cover.
    • Dip your brush or sponge into the fabric paint and apply it to the pillow cover in thin, even layers.
    • Remove the stencils or tape carefully once you’ve finished painting.
  4. Dry and Set the Paint:
    • Let the paint dry completely according to the paint manufacturer’s instructions.
    • Heat-set the paint with an iron (if required by the paint you’re using) to make it washable.
  5. Enjoy Your Custom Pillow:
    • Insert your pillow and admire your custom creation!

2. Embroidered Pillow Covers

Materials:

  • Plain pillow cover
  • Embroidery hoop
  • Embroidery floss in desired colors
  • Embroidery needle
  • Fabric pencil or chalk
  • Scissors

Instructions:

  1. Sketch Your Design:
    • Lightly sketch your design on the pillow cover with a fabric pencil or chalk.
  2. Prepare for Embroidery:
    • Place the area of the pillow cover with the design in an embroidery hoop. Tighten the hoop to keep the fabric taut.
  3. Thread Your Needle:
    • Cut a length of embroidery floss and thread your needle. Knot the end of the floss.
  4. Begin Embroidering:
    • Start stitching along the lines of your design using basic embroidery stitches like backstitch, satin stitch, or French knots. Continue until your design is complete.
  5. Finish Up:
    • Tie off the floss on the backside of the fabric and trim any excess.
    • Remove the pillow cover from the hoop and press it gently to remove any wrinkles.
  6. Show Off Your Work:
    • Slip the pillow back into the cover and display your new embroidered piece.

3. Fabric Embellished Pillow Covers

Materials:

  • Plain pillow cover
  • Fabric scraps or embellishments (lace, ribbons, patches)
  • Fabric glue or sewing supplies
  • Scissors
  • Pins

Instructions:

  1. Plan Your Embellishments:
    • Decide on the placement and arrangement of your fabric scraps or embellishments on the pillow cover. Lay them out before attaching to ensure you like the design.
  2. Attach the Embellishments:
    • For no-sew options, use fabric glue to attach the embellishments. Apply a small amount of glue to the back of each piece and press it onto the pillow cover.
    • If you prefer to sew, pin the embellishments in place and use a needle and thread to secure them with small, even stitches.
  3. Let it Dry:
    • If you used fabric glue, allow it to dry completely according to the manufacturer’s instructions.
  4. Final Touches:
    • Once dry, check that all embellishments are securely attached.
    • Insert your pillow into the cover.
  5. Enjoy Your Custom Look:
    • Your pillow cover is now personalized with unique embellishments, adding a distinctive touch to your decor.

These DIY projects offer a fun and creative way to customize your home decor. With just a few materials and a bit of time, you can transform plain pillow covers into personalized works of art!

 

 

 

 

Chambalon Collection On Pinterest | Discover European Shams | Features of Our Shams

Saved Boards On Pinterest | YouTube Channel